All reports
Low

kernel: usb: dwc3: core: Do core softreset when switch mode

Affected versions

Affected versions
Unknown
Fixed version
Not reported
Affected versions
Unknown
Fixed version
Not reported
Affected versions
Unknown
Fixed version
Not reported

Exploitation

CVE-2021-46941

Probability of exploitation in the next 30 days: 0.23%

FIRST EPSS · 2026-11-21

Description

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Do core softreset when switch mode According to the programming guide, to switch mode for DRD controller, the driver needs to do the following. To switch from device to host:

  1. Reset controller with GCTL.CoreSoftReset

  2. Set GCTL.PrtCapDir(host mode)

  3. Reset the host with USBCMD.HCRESET

  4. Then follow up with the initializing host registers sequence To switch from host to device:

  5. Reset controller with GCTL.CoreSoftReset

  6. Set GCTL.PrtCapDir(device mode)

  7. Reset the device with DCTL.CSftRst

  8. Then follow up with the initializing registers sequence Currently we're missing step 1) to do GCTL.CoreSoftReset and step 3) of switching from host to device. John Stult reported a lockup issue seen with HiKey960 platform without these steps[1]. Similar issue is observed with Ferry's testing platform[2]. So, apply the required steps along with some fixes to Yu Chen's and John Stultz's version. The main fixes to their versions are the missing wait for clocks synchronization before clearing GCTL.CoreSoftReset and only apply DCTL.CSftRst when switching from host to device. [1] https://lore.kernel.org/linux-usb/20210108015115.27920-1-john.stultz@linaro.org/ [2] https://lore.kernel.org/linux-usb/0ba7a6ba-e6a7-9cd4-0695-64fc927e01f1@gmail.com/