همهٔ گزارش‌ها
کم

kernel: ceph: do not repeat ceph_trim_dentries() if no progress possible

متن اصلی

نسخه‌های متأثر

نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده

بهره‌برداری

CVE-2026-89647

احتمال بهره‌برداری در ۳۰ روز آینده: 0.68%

FIRST EPSS · ۱۴۰۵/۰۸/۲۶

شرح آسیب‌پذیری

In the Linux kernel, the following vulnerability has been resolved: ceph: do not repeat ceph_trim_dentries() if no progress possible ceph_cap_reclaim_work() re-queues itself for as long as ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease walk exhausts its nr_to_scan budget. This creates a busy loop that consumes CPU without making any progress when there is nothing to reclaim: with no cap pressure (count==0) and every scanned lease still valid, each pass runs the full scan budget down to zero and returns -EAGAIN, only to be queued again immediately. The dir-lease walk made this worse. When expire_dir_lease is false (i.e. we have no intention of reclaiming dir leases), __dir_lease_check() returned TOUCH for every valid lease. TOUCH moves the dentry to the tail of the list and resets di->time via __dentry_dir_lease_touch(), so a walk over N valid leases pointlessly rewrote the list, refreshed the timestamps (preventing them from ever aging out) and always drained nr_to_scan, guaranteeing the -EAGAIN requeue. Fix this in three steps:

  • Return KEEP instead of TOUCH when expire_dir_lease is false. If we are not going to reclaim the lease, leave it in place instead of churning the list and resetting its timestamp; the walk then terminates naturally (or via STOP at the first fresh lease).

  • Only return -EAGAIN from the first (dentry-lease) walk when something was actually freed. A full batch that frees nothing means retrying the same list immediately is futile; fall through to the dir-lease walk instead.

  • After both walks, bail out with success (0) when nothing was freed and there is no cap pressure (count==0). There is no reason to keep retrying when we are not over the cap limit and made no progress. Under real cap pressure (count>0) the reclaim path is unchanged and still retries via -EAGAIN. Without this patch, I saw 500 ceph_trim_dentries() calls per second on our web servers. This is very visible in /proc/lock_stat (5 minute capture): class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00


&mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 &mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0

&mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 &mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 With this patch: class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27

&mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 1 ---truncated---

A flaw was found in the Linux kernel's Ceph file system. The ceph_trim_dentries() function, when invoked by ceph_cap_reclaim_work(), can enter an infinite loop under specific conditions where no leases need to be reclaimed. This busy loop causes excessive CPU utilization, potentially leading to a Denial of Service (DoS) for affected systems.