همهٔ گزارش‌ها
متوسط

kernel: gve: fix Rx queue stall on alloc failure

متن اصلی

نسخه‌های متأثر

نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده
نسخه‌های متأثر
نامشخص
نسخهٔ اصلاح‌شده
اعلام نشده

بهره‌برداری

CVE-2026-68129

احتمال بهره‌برداری در ۳۰ روز آینده: 0.51%

FIRST EPSS · ۱۴۰۵/۰۸/۳۰

شرح آسیب‌پذیری

In the Linux kernel, the following vulnerability has been resolved: gve: fix Rx queue stall on alloc failure When the system is under extreme memory pressure, page allocations can fail during the Rx buffer refill loop. If the number of buffers posted to hardware falls below a critical low threshold and the refill loop exits due to allocation failures, the queue can stall:

  1. The device drops incoming packets because there are no descriptors.

  2. Since no packets are processed, no Rx completions are generated.

  3. Because no completions occur, NAPI is never scheduled, preventing the refill loop from running again even after memory is freed. This results in a permanent queue stall. Resolve this by introducing a starvation recovery timer for each Rx queue. If the number of buffers posted to hardware falls below a critical low threshold, start a timer to periodically reschedule NAPI. Once NAPI runs and successfully refills the queue above the threshold, the timer is not rescheduled. The threshold is set to 32 because a single maximum-sized Receive Segment Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path. Lower thresholds (such as 8 or 16) would be insufficient to process a complete maximum-sized RSC packet, risking packet drops or unexpected hardware behavior under memory pressure. Setting the threshold to 32 guarantees a safe margin to handle at least one full RSC packet.

A flaw was found in the Linux kernel's gve driver. Under extreme memory pressure, the driver's receive (Rx) buffer refill process can fail, causing the number of buffers available to hardware to drop below a critical threshold. This can lead to a permanent network queue stall, where the device drops incoming packets and network processing (NAPI) is not scheduled, effectively causing a Denial of Service (DoS).